WHAT WE NEED Most of all:
Clean smooth boards:
1 x 6, or 1 x 8 -48” and also shorter lengths
Paint: Ben Moore Chrome Green “Moorglo/soft gloss”
Bright white acrylic exterior enamel
A couple of paint brushes.
Also we need Deckmate plus evercote 8 x 3” Phillips square Drive screws (or similar)
Rags
Scotch-brite green scrubbies
1” foam brushes
Muralo Waterbourne Acrylic (1700 series)in Safety Blue/Safety Red/Safety Orange and Safety Yellow for markers, but this is not an immediate need.
We hope to make a few larger signs/ or kiosks, and will need plans, and supplies for them.
Always can use work gloves, too, and the infamous blue bags.
Clean smooth boards:
1 x 6, or 1 x 8 -48” and also shorter lengths
Paint: Ben Moore Chrome Green “Moorglo/soft gloss”
Bright white acrylic exterior enamel
A couple of paint brushes.
Also we need Deckmate plus evercote 8 x 3” Phillips square Drive screws (or similar)
Rags
Scotch-brite green scrubbies
1” foam brushes
Muralo Waterbourne Acrylic (1700 series)in Safety Blue/Safety Red/Safety Orange and Safety Yellow for markers, but this is not an immediate need.
We hope to make a few larger signs/ or kiosks, and will need plans, and supplies for them.
Always can use work gloves, too, and the infamous blue bags.
No comments:
Post a Comment